Sàn nâng Hàn Quốc
1
2
3
4
5
6
7
- Mô tả sản phẩm
- Thông số kỹ thuật
- Công trình
Calcium Sulfate Board
It has an excellent load carry capacity with high density minerals.
Feature of Product
Strong wet endurance and durability
It is easy to maintain and manage with PVC tape type
Low heat conductivity during fire
Many finishing materials to choose
 |
 |
 |
Specifications
| Model NO. | DIEMENSION | TYPE | Weight | Concentrated Load | Finish Tile |
| WKM | 600 x 600 x 30mm | SP type | 16kg/PCS | 500kgf(4.9kn) | Conductive Tile Homogeneous Tile Hard Wood, Stone Deluxe Tile GI Sheet, AL Sheet HPL, LPM Rubber Tile, Sheet |
| USP type | 17kg/pcs | 700kgf(6.86kn) |
Wood Core Panel
We have a various choices by using an escellent 35, 38t high density particle board(PB) with load
Feature of Product
A good workingt and that the wood flooring is designed to be noise free even when walking on it
It is easy to maintain and manage with PVC tape type
This panel of lightweight has good points to construct, use and process
Many finishing materials to choose Use of wood gives reasonable price
 |
 |
 |
Specifications
| Model NO | DIEMENSION | TYPE | Weight | Concentrated Load | Finish Tile |
| WKW | 600 x 600 x 35mm | R type | 9.5kg/pcs | 300kgf(2.94kn) | Conductive Tile Homogeneous Tile Hard Wood, Stone Deluxe Tile GI Sheet, AL Sheet HPL, LPM Rubber Tile, Sheet |
| 600 x 600 x 38mm | SP type | 11.5kg/pcs | 500kgf(4.9kn) |
Steel, Steel Concrete Panel
Due to triple structural mechanice, disperse the concentrated load in order to reinforce the distributed load, the impact load and load carrying capacity
As the epoxy powder coating, reinforces durability and prevents corrosion
Feature of Product
Due to triple structural mechanice, disperse the concentrated load in order to reinforce the distributed load, the impact load and load carrying capacity
Strongly nonflammable
As the epoxy powder coating, reinforces durability and prevents corrosion
By pouring the concrete, removes resonance and reinforces load carrying capacity
 |
.jpg) |
.jpg) |
Specifications
| Model NO. | DIEMENSION | TYPE | Weight | Concentrated Load | Finish Tile |
| WKS | 600 x 600 x 33mm | R type | 7kg/pcs | 300kgf(2.94kn) | Conductive Tile Homogeneous Tile Deluxe Tile |
| 600 x 600 x 33mm | SP type | 9kg/pcs | 500kgf(4.9kn) | ||
| WKSC | 600 x 600 x 33mm | R type | 13.5kg/pcs | 300kgf(2.94kn) | |
| 600 x 600 x 33mm | SP type | 15.5kg/pcs | 500kgf(4.9kn) |
OA PRC Panel
It has excellent load carry capacity with W.F.R.C (Wood Fiber Reinforced cement)
Feature of Product
Strong wet endurance and durability
Low heat conductivity during fire
Qualities of the W.F.R.C are excellent walking mechanism with instantaneous elasticity modulus
Construction, Processing and easy of use
.jpg) |
.jpg) |
.jpg) |
Specifications
| Model NO. | DIEMENSION | TYPE | Weight | Concentrated Load | Finish Tile |
| WKM-OA | 500 x 500 x 25mm | R type | 11kg/pcs | 300kgf(2.94kn) | OA Tile Carpet Tile (Separate construction) |
| 500 x 500 x 25mm | SP type | 11.2kg/pcs | 500kgf(4.9kn) |
Quality control
| Classification | Quality standard KS F 4760 | Our test standards |
| Length | The tolerance of ± 0.5mm dimensions should be less than the length of each side. | ± 0.3mm or less |
| Right Angel | It should not be more than 0.1% of the side length | equal or higher |
| Flatness | To be less than 1.0mm at the peripheral portion. It should be 2.0mm or less in the center and other areas. |
1.0mm or less in all |
| Interior pressure resistance |
R-type : In the local deformation under compressive load 2,940N (300kgf) should be 4.0mm. SP type : from local deformation under compressive load 4,900N (500kgf) should be 4.0mm. |
3.5mm or less |
| Impact Resistance | The cracks or cracks should not occur. | equal or higher |
| Combus tibility resistance |
Burning time after flame/ Burningtime after glow=0 | equal or higher |
| Antistatic Property | Human vs. voltage shall be Vp < 3000 V. | equal or higher |
| Leakage Resistance | The resistance value must be 1x 105Ω 10Ω | equal or higher |
| Anti-corrosion Property | Rating adhesion of the coating should be at least 4B. There shall be no modification or lifting of the paint surface due to the salt spray test. |
equal or higher |
CÔNG TY TNHH ĐẦU TƯ VÀ XÂY DỰNG VITOCO
***VPGD Hà Nội : A1503 - Tòa Beasky - Đại Lộ Chu Văn An - Hoàng Mai - Hà Nội
***VPGD Tp. HCM : C10.20 - Tháp A1 - Chung cư Đạt Gia - Đường Cây Keo - Thủ Đức - HCM
***Tổng kho: Lô B2.5 thuộc Khu đô thị Thanh Hà Cienco 5 – Cự Khê – Thanh Oai - TP Hà Nội
Điện thoại: 024.22.11.52.52 - Hotline: 0987.822.373
Website: https://www.vitocogroup.com - Email: info.vitocogroup@gmail.com
